BNHWG - ELECTROLYTE GAS SENSOR
- MSDS: BNHWG
- Manufacturer: GAS TECH INC
- Product Name: ELECTROLYTE GAS SENSOR
- National Stock Number: 6630-00F023526
Product Identification
Product ID:ELECTROLYTE GAS SENSOR
MSDS Date:03/22/1990
FSC:6630
NIIN:00F023526
MSDS Number: BNHWG
Responsible Party
NEWARK, CA 94560-3431
US
Emergency Phone: 415-794-6200
Info Phone: 415-794-6200
Preparer: WILSON
Cage: FO755
Contractor
Telephone: (415) 794-6200
Cage: FO755
Ingredients
SULFURIC ACID
CAS: 7664-93-9
RTECS: WS5600000
Fraction By Weight: 9-32%
OSHA PEL 1 MG/CUM
ACGIH TLV: 1 MG/CUM=IC
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:NO
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN & EYES: SEVERE BURNS INHALATION:
VAPORS MAY CAUSE COUGHING, CHEST PAINS, DIFFICULTY IN BREATHING.
INGESTION: MAY BE FATAL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: IRRITAITON, MUCOUS MEMBRANE BURNS.
INHALATION: VAPORS MAY CAUSE COUGHING, CHEST PAINS, DIFFICULTY IN
BREATHING. INGESTION: MAY BE FATAL.
First Aid
First Aid:EYES/SKIN: FLUSH THOROUGHLY W/WATER FOR 15 MINUTES. OBTAIN
MEDICAL ATTENTION IN ALL CASES.
Accidental Release
Spill Release Procedures:AVOID CONTACT W/LIQUID, NEUTRALIZE SPILL
W/SODA ASH, LIME OR SODIUM BICARBONATE ( BAKING SODA). RUBBER
GLOVES ARE RECOMMENDED DURING CLEANUP.
Handling
Handling and Storage Precautions:DO NOT ATTEMPT TO DISASSSEMBLE
ELECTROLYTIC CELL. DO NOT USE OR STORE CELL AT TEMPERATURES ABOVE
150 F.
Exposure Controls
Protective Gloves:RUBBER GLOVES
Eye Protection:GOGGLES/FACE SHIELD
Work Hygienic Practices:FOLLOW INSTRUCTION MANUAL IN USE OF PRODUCT.
Supplemental Safety and Health
BOILING RANGE: 250-400 F
Chemical Properties
Boiling Pt:B.P. Text:SEE SUPP
Vapor Density:3.40
Spec Gravity:1.03-1.53
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR TO YELLOWISH OILY LIQUID
Stability
Stability Indicator/Materials to Avoid:YES
COTTON, PAPER, COPPER ALLOYS, ORGANIC MATERIALS, METALS, REDUCING
MATERIALS, MOISTURE.
Stability Condition to Avoid:EXOTHERMIC ON EXPOSURE TO WATER, CORROSIVE
TO ORGANICS
Hazardous Decomposition Products:OXIDES OF SULFUR
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE W/ALL APPLICABLE FEDERAL,
STATE & LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.